Best for beginner. The media could not be loaded. The quality of this 3d printer is in the 15k range most affordable. you can go for it with out any doubt.

L’imprimante imprime très bien, je n’ai pour le moment utilisé que du PLA. Le plateau chauffant et le nivellement automatique du plateau facilitent son utilisation. On apprécie rapidement l’outil et au vu du prix je me demande si je n’aurais pas dû prendre la version plusieurs couleurs…. Au plus on imprime au plus on en veut…

Day one review (edit after one week). The media could not be loaded. Assembly: Straightforward, took under an hour to assembleFirst print: Printed the spider that came in the SD card, took about 20minutes for this print, during printing I had a brief (about 10seconds) power cut and fortunately could test the resume printing functionality which worked well.Print quality: Is reasonably okay for a printer of this cost.Possible issues based on first print:Lot of vibration in the printer, maybe need to adjust the print speed to address this.The autolevel feature did not result in the best possible z offset, the extruder seemed too close to the bed which resulted in some printing issues but that can be manually adjusted.Additional learning after week 1: You need to be very careful with the filament tube and check the pneumatic push coupler where you insert the tube to confirm that the push mechanism is working properly. If it doesn’t work and you pull the filament tube out too much you will not be able to push it back in! Mine was faulty and got a replacement after figuring out the malfunction.

Acquistare la Anycubic Kobra 3 è stata una scelta eccellente per me come principiante. La stampante è stata incredibilmente semplice da montare e pronta per la stampa in pochissimo tempo. Le istruzioni erano chiare e precise, anche se purtroppo non erano disponibili in lingua italiana. Questo ha reso l’intero processo molto agevole, anche per chi, come me, era alla prima esperienza con una stampante 3D.Una volta familiarizzato con lo slicer proprietario di Anycubic, sono riuscito a utilizzarla senza alcun problema. L’interfaccia è intuitiva e facile da navigare, permettendo di iniziare a stampare rapidamente. La Kobra 3 si è dimostrata molto affidabile, producendo stampe di alta qualità fin dal primo utilizzo.In sintesi, la Anycubic Kobra 3 è una stampante 3D ideale per i principianti grazie alla sua semplicità di montaggio e utilizzo. Consiglio vivamente questo modello a chiunque voglia entrare nel mondo della stampa 3D senza complicazioni.

Ultimate Quality product. I must say to buy it if you are 3D printing enthusiastic and beginner.

Amazing Budget Printer with excellent experience for beginners. If you are just starting with 3d printer, this printer is best for you. Although the minimum layer width you can print is probably 0.8mm with this one with a 0.4 mm nozzle. but the prints turn out great, almost no imperfections and issues. I am using the Anycubic slicer which works like a charm with this printer..

Best 3D Printer for Beginners, Can print PLA,PETG and ABS with ease. The media could not be loaded. When i ordered this 3D printer, i did not expect much from it. I bought it to 3D print prototypes for car parts and some other stuff, especially because i did not expect it to print ABS for the price. But this printer has really blown my mind.The Assembly was pretty straightforward, it was easy to set it up and get it running. I put on the test prints and was actually surprised by the Benchy it made in 40 minutes. I bought a roll of PLA to print prototypes with, and the prints were turning out fine. So i decided to get PETG as well to make some functional prints as that was the most i thought this printer could do.I was pretty happy with the prints, they were good quality, had no adhesion issues, no warping and overall were a good experience.But one day i just decided to try and push this printer to its limits, and i bought a roll of ABSThis is where i started having warping issues, So i first added an enclosure, then had to manually set the Z-offset, and eventually they started sticking well and printing in great quality. I really was surprised that this little thing could print ABS this well.Now most prints are in ABS and this thing has been handling them pretty well. Overall, for the 13.5k i paid for this printer(on sale), i am absolutely blown away and would recommend it to anyone who wants to start 3D printing as a hobby, or even anyone who needs a 3D printer to help improve their workflow.Attached video of a print in ABS

Beginners friendly printer. The media could not be loaded. After 3to4 months it’s working properly, best for the beginners, print quality is good , some times i facing the problem of “Resume printing”, otherwise it’s ok.